In-Ground Fuel / TLS Dashboard
Click on In-Ground Fuel/TLS
To begin, click on the In-ground Fuel/TLS icon. This is the 5th option on the menu
2. Set Parameters
To view Fuel/TLS statistics, selecting the Store(s) and Reporting Period is required.
Change Selected Stores
If you have multiple stores connected to your Petro Outlet platform, you can generate a single report that combines the data for all stores or you can pull individual reports by store.
Multi-Store Report
Select all stores linked to your account
Individual Report
Select the specific store you would like to view data for
3. Change Reporting Period
Once you have selected the store (s), it’s time to set the Reporting Period. You can choose between cashier shifts or by a custom time range.
Cashier Shifts
Custom Time Range
Cashier Shifts
From the drop-down menu, select the start & end shifts
Custom Time Range
With the Custom Time Range feature, you have the option to request data by date & time (the hour)
Date
4. TLS Report
In-Ground Fuel/TLS Report
Once your conditions are set, the following fuel statistics will display:
Recorded at
Water
Temperature
Height
Capacity
Delivered
Sold
Total Out
Shrinkage
5. Set Alert Amount
Here you will set the Alert Threshold. Once the amount reaches or drops below this figure, the alert will be issued.
Click on the icon to adjust
6. Set Store Alert Subscribers
Enter the Phone Number & Email addresses here to receive Store Alerts
Click to add/remove phone numbers & email addresses
7. Sensor Alerts
The TLS console is constantly monitoring its systems & sensors for warning and alarm conditions, such as fuel leaks, excessively high or low fuel levels, and equipment problems. If anything is amiss, alerts will appear here and you will be notified.
Related Articles
How to Set Up Tank Level Sensor
Veeder-Root, we will set this up and enable it as long as long as you're on our Business Plan. Here are the prerequisites: TLS = Tank Level Sensor AKA ATG = Automatic Tank Gauge There are two kinds of TLS integrations: Direct - Our system ...How to Create a Department
Products within a store’s inventory fit into or are classified by certain categories. Those categories are referred to by the Super Sonic POS as Departments. Follow these steps to create a Department: Click on Store Management Click on Store ...How to Print Shelving Labels
Click on Store Management From your dashboard, click on Store Management (3rd Item on the left-hand side menu) Click on Products This is the 4th item on the left-hand side menu Select Product Search for the product you would like to print a label ...Veeder Root Install/Setup
Installing the Veeder Root TCP/IP Module/Card Key components of the TCP/IP Interface module TLS-300/PROPLUS CONSOLES 1. Open the left door of the console (see Figure 2). Verify that the battery backup switch is in the On position, then turn Off power ...How to Generate Scan Data Reports
Reports From your dashboard, click on Reports 2. Scan Data Report Select Scan Data Report from the pop-out menu 3. Notice in Blue Note the message in Blue 4. Change Selected Stores If you have multiple stores connected to your Petro Outlet system, ...