Connect Your Device to the Internet
Locate and Insert Ethernet cable into the LAN Port on the Bottom of the Device.
(Only for VL100/VP100 Devices)
• VL100/VL110/VP100 Guide – First time booting the device the screen will prompt with “Do you want to Connect to WIFI?”.
After selecting 1.Yes, Connect, select your WIFI SSID, enter the WIFI Password and select OK.
If configured correctly your Terminal will load to your HOMESCREEN.
• VL500/VP500 Guide – First time booting the device the screen will prompt with “Network Error Please Configure in Settings”.
Select Setup to enter the Settings Menu. Select WLAN followed by your WIFI SSID. After entering your WIFI Password select Connect.
Then press the Triangle button to on the bottom-left of the screen to get back to the HOMESCREEN.
• VL110 Guide – Upon receiving the device your SIM card should be pre-installed by your ISO into the Terminal.
When you power on the device the Terminal will prompt with “Do you want to Connect to WIFI.”
After selecting 2.No, I Don’t have WIFI your Terminal will now prompt “Do you want to Connect GPRS?”.
After selecting 1.Yes, Connect your Terminal will connect via GPRS and will load to your HOMESCREEN.
Related Articles
Device Error Codes
POS Error Codes Related to the device types Response Message Comments - for the Error code 016665XX VL100/ VL110 Transaction Canceled The user has cancelled the transaction. Please do the transaction again 016666XX VL100/ VL110 Transaction Timeout ...
Connect to a Merchant's Device
1. Navigate to Remote Diagnostics in the Sidebar Menu 2. Ensure Merchant is in Remote Diagnostics Mode on the Terminal VL100/VL110/VP100 = Favorites button, followed by 9.Start RD. VL500/VP500 = Currently Unavailable 3. Locate Merchant Terminal ...
Connect to a Merchant's Device
1. Navigate to Remote Diagnostics in the Sidebar Menu 2. Ensure Merchant is in Remote Diagnostics Mode on the Terminal VL100/VL110/VP100 = Favorites button, followed by 9.Start RD. VL500 = Currently Unavailable 3. Locate Merchant Terminal followed by ...
Connect to a Merchant's Device
1. Navigate to Remote Diagnostics in the Sidebar Menu 2. Ensure Merchant is in Remote Diagnostics Mode on the Terminal VL100/VL110/VP100 = Favorites button, followed by 9.Start RD. VL500/VP500 = Currently Unavailable 3. Locate Merchant Terminal ...
Set Device as Default for Valor Connect
1. Navigate to Merchant Management in the Sidebar Menu. 2. Locate the Merchant you wish to Edit followed by selecting the Vertical Ellipsis(⋮), then Edit. 3. Navigate to Page 3 for Devices. 4. Select Set as Default after selecting desired device ...