Utility

Utility

1. Enter Password (Default= Last 4 Digits of EPI)

2. Select one of the following:

  • Software Download

    • TMS = Request a Full or Partial App Download from the Server

    • USB = Pull a Full App Download from a Connected USB.

  • Comm Config = Communications Configuration

    • Media = (Upcoming Function)

    • Configure

      • Host Config
        • App Server Configuration Settings
        • Parameter Server Configuration Settings
      • Comm Config
        • WIFI
          • WIFI SSID Selection
            • Disconnect
            • Configure
              • Set Password
              • Set DHCP Mode
              • Set IP Address
              • Set Mask IP Address
              • Set Gateway IP Address
              • Set DNS IP Address
            • Delete WIFI Credentials from Terminal
        • Ethernet (VL100 / VP100)
          • Disconnect
          • Configure
            • Set Password
            • Set DHCP Mode
            • Set IP Address
            • Set Mask IP Address
            • Set Gateway IP Address
            • Set DNS IP Address
        • GPRS (VL110)
          • Connect
          • Configure
            • Set SIM Slot (Slot 1 or 2)
            • Set APN (Access Point Name)
            • Set User Name
            • Set Password
            • Set Pin Code
          • SIM Slot Number

    • Related Articles

    • Host Utility

      Advanced Host Utility Settings 1. VOID = Process a Credit Void 2. Pre-Sale Ticket = Create a Pre-Sale Ticket (CREDIT) 3. Tip Adjust = Perform a Tip Adjust on a Open Batch Transaction (CREDIT) 4. Ticket = Close a Pre-AUTH Sale (CREDIT) 5. Clear ...

    • Host Utility

      Advanced Host Utility Settings 1. VOID = Process a Credit Void 2. Pre-Sale Ticket = Create a Pre-Sale Ticket (CREDIT) 3. Tip Adjust = Perform a Tip Adjust on a Open Batch Transaction (CREDIT) 4. Ticket = Close a Pre-AUTH Sale (CREDIT) 5. Clear ...

    • Utility

      1. Enter Password (Default= Last 4 Digits of EPI) 2. Select one of the following: Software Download TMS = Request a Full or Partial App Download from the Server USB = Pull a Full App Download from a Connected USB. Comm Config = Communications ...

    • Add or Remove Clerk / Server

      1. Select the Menu button (three lines) followed by Host Utility. 2. Enter the Password (Default = Last 4 of EPI) followed by the Down Arrow then Clerk/Server.

    • Add or Remove Clerk / Server

      1. Select the Menu button (three lines) followed by Host Utility. 2. Enter the Password (Default = Last 4 of EPI) followed by the Down Arrow then Clerk/Server.