How to setup Kitchen Printer (for SuperSonic POS)

If ordered, a second printer with the proper IP configuration (10.83.83.124) will be provided. It's important ensure the additional printer is connected to ensure full communication with the SuperSonic POS system.

Unlike a standard SuperSonic POS printer, a kitchen printer will only have 2 connections instead of 3. One will be the power cable, providing power to the printer, and the other connection will be the ethernet cable to the router and/or switch. Refer to picture reference 3.

Exact configuration varies with available ports:

Router to Printer. Refer to picture reference 1

Router to Switch to Printer. Refer to picture reference 2

Note: A switch is used if there aren't any available ports on the router or more are needed.

Reference 1

Reference 2

Reference 3

Reference 4 (Note: this reference pic doesn't have the power cable plugged in, be sure to provide power to the router with it.)

Be sure the ethernet cables are properly connected to ensure full communication.

• Related Articles

• How to setup Menus (for SuperSonic POS)

  In Store Management, under Registers. Select Menu Management at the top of the page. On the top right, find the + New Menu button. The Menu Editor page should open. In the Name text box, write the name of the menu you. Example: Food. Using the Menu ...

• How to Setup DYMO Shelving Label Printer

  Prerequisites: Get the correct Printer & Labels: DYMO 450 Turbo Label Writer Printer - or the 4XL https://smile.amazon.com/DYMO-LabelWriter-Thermal-Printer-1752265/dp/B0027JIIKQ These are the labels to use for the 450 Printer: DYMO 30334 label (the 4 ...

• Veeder Root Install/Setup

  Installing the Veeder Root TCP/IP Module/Card Key components of the TCP/IP Interface module TLS-300/PROPLUS CONSOLES 1. Open the left door of the console (see Figure 2). Verify that the battery backup switch is in the On position, then turn Off power ...

• How to Set Ad on Customer Side of SuperSonic POS

  Setting an ad will replace the Welcome to Store displayed on the white background on the customer's side of the SuperSonic POS. Go to Store Management and then select Registers. Here will be the list of registers under the store. On the right hand of ...

• Petro Outlet Connector Installation for SuperSonic POS/Gilbarco Passport

  Note: It's important to make sure the site has a back-office computer. Follow the guide exactly. Step 1- Enable BackOffice on Passport: From the POS screen Select More and then Tools you will need the merchant to enter their operator ID. Click on the ...